After the highs of attempting to replicate realism inherent in a Race Queen's
facial features, my mood slowly leveled out as I worked on the Head Unit of the
RX-78-2 Gundam. That's not to say I didn't enjoy the process of painting and putting the mecha's head together. I did. Besides it provides a welcome change of pace, forcing me to vary my usual approach to a project. Knowing myself, I'm pretty sure if I painted human faces all the time then the highs would soon feel like a regular norm. But I digress. Below is the process of painting and building the RX-78-2 Gundam's iconic head.
|
Master Grade RX-78-2 Gundam Version 3.0: Head Unit, unlighted |
At this fairly advanced stage, the only new paint I had to use was the
Tamiya X-27 Clear Red acrylic paint. This time though I used lacquer thinner as a solvent instead of the standard water-and-alcohol thinner mix for acrylic paints. Characteristics of Tamiya's alcohol-based acrylic paint allow for this, and it's suppose to make the paint layers more resistant to scratches and damage. Do note however that it's generally always a bad idea to add lacquer thinner to water-based acrylic paints.
|
Pieces of the RX-78-2 Gundam Head Unit all laid out (and painted) prior to assembly |
|
Core of the Head Unit assembled; awaiting the outer armor panels and 60 mm vulcan guns (yellow part) |
|
Here the top half of the Head Unit is still exposed, awaiting final assembly including the iconic 'V' fin |
|
RX-78-2 Gundam Head Unit fully assembled, painted and panel lined |
There are two tones of white on the Head Unit. Bluish white on the section encasing the twin 60 mm Vulcan Guns - the only yellow parts on the head. [
A bit of Gundam trivia: the Vulcan Guns are the mecha's close-in weapon system that's used against smaller, less heavily armored targets like missiles, vehicles, etc. They are ineffective against other Mobile Suit Armor.] Meanwhile pure white forms the predominant hue of the Head Unit with some red, black, metallic and yellow making up the rest of the color scheme. The eyes comprise clear parts which will channel light from the
LED Unit.
|
RX-78-2 Gundam Head Unit (front view) |
|
RX-78-2 Gundam Head Unit (three quarter view, front-left) |
|
RX-78-2 Gundam Head Unit (left profile) |
|
RX-78-2 Gundam Head Unit (three quarter view, from the back on the left side) |
|
RX-78-2 Gundam Head Unit (back view; note bluish white mid-section sandwiched by white armor) |
That segues nicely into the fact that I haven't yet tested how
LED lights effect the RX-78-2 Gundam Head Unit. I thought I would leave that one for the final photo reveal. Speaking of lighting effects, I proceeded to hand brush the eye area with black primer paint to prevent light leakage. Although black sticker decals were provided for this purpose, I didn't use them. Well, you should know how I feel about sticker decals by now. If you don't, feel free to revisit my constant whinging about sticker decals in past posts. Anyway, hand brushing black onto the eye piece was a quick and easy process.
|
RX-78-2 Gundam Head Unit (three quarter view, from the back on the right side) |
|
RX-78-2 Gundam Head Unit (right profile) |
|
RX-78-2 Gundam Head Unit (three quarter view, front-right) |
|
RX-78-2 Gundam Head Unit (front view with head tilted slightly upwards to show a clearer view of the eyee) |
|
Top down view of the RX-78-2 Gundam Head Unit |
Upon finishing the RX-78-2 Gundam Head Unit, I was admittedly surprised at its relatively small size in comparison the its
Body Unit. In theory I suppose it makes sense as the head isn't truly critical to the mecha's operations in that the Mobile Suit can still function, albeit less effectively, without it. If memory serves me, the head contains the Vulcan Guns as well as the main camera and sensors. But because the pilot is situated in the torso and some secondary cameras and sensors exist on the body, the Gundam can still operate without its head. A blow to the torso however, and it's bye bye Gundam. And with that I bid you farewell for now and end with a totally unrelated quote (apart from the color red) from
Pennywise the clown ...
Ohhh. Come on, bucko. Don't you want a... balloon?
Looking great!
ReplyDeleteThank you Michal.
DeleteFantastic work on the head ! Can't wait to see it all come together.
ReplyDeleteGreetings
Thank you Mario, I can't wait either :)
DeleteI love your change of projects and how varied they are, this is neat job on the head, it's the kind of stuff I love seeing people do but couldn't myself ^^
ReplyDeleteThanks ^^ but I'm super sure you could easily do it yourself if you wanted to as your skill set is way up there :)
DeleteNice meticulous work! I'm too impatient to be that methodical!
ReplyDeleteThanks! Now here's the kicker ... I'm impatient too but I just can't not do it. Go figure ;) :)
DeleteI love where this project heads to (haha, yes, terrible pun). No, seriously, it's fantastic, it makes me lose my head. Oh, ehm...
ReplyDeleteHeh heh ... thank you Suber ^_^
DeleteComing together nicely! Wouldn't have spotted the fine tonal difference in the two different whites you used. But now I know I think it's a clever move to make it look more interesting/ less flat without the use of weathering or some such.
ReplyDeleteI love that this kit has a color scheme recommendation of three kinds of white i.e. pure white, bluish white and light brownish off-white. Can't take credit for it though as it was all mapped out by the Bandai design team.
DeleteThe kit keeps on impressing me, this is definitely a high quality model and the result gets better and better with each update.
ReplyDeleteIt's an awesome kit at least in terms of detail. And thank you for the nice words Wouter!
Delete